Detroit Truetrac V8 Camaro 8.6

2010+ V8 Camaro Differential

 

2010+-Camaro-Differential Parts

Late Model Camaro Differentials –

The 2010+ V8 Camaro uses a 10-Bolt GM 8.6″, & 218mm axle. West Coast Differentials offers an variety of Chevrolet Camaro differential and axle parts for 2010 and newer V8 Models.

Available parts include the AAM TracRite PC Limited-Slip Differential, Eaton’s Detroit TrueTrac, Ring & Pinion Gear Sets, Bearings, Install Kits & Seals.

The AAM TracRite PC (Plate Clutch) Traction Enhancing Differential is configured to bias torque to the high-traction wheel, based on torque input.

Another available option is Eaton’s Detroit TrueTrac, a maintenance-free helical gear type limited-slip differential.

Available ring & pinion gear ratios include 3.08, 3.23, 3.27, 3.45, 3.73 and 3.91. 

For more information call our Sales Department at (800)510-0950 or check out the Application Guide for Camaro

 

 

Toyota Tacoma 4.11 Ring & Pinion

 

Tacoma 4.11 Gears Sierra Gear and Axle

Toyota Tacoma 4.11 Gears!

Until recently, the only available option for Tacoma owners wanting a replacement gearset with a 4.11 ratio has been high-priced Toyota dealer parts. West Coast Differentials offers a much more practical Tacoma 4.11 alternative.

We carry Sierra Gear & Axle quality Toyota Ring and Pinion Gears at reasonable prices. Available in 4.11, 4.56, 4.88 and 5.29, Sierra Gear Ring and Pinion Gearsets are engineered and manufactured for easy setup, quiet operation and long trouble-free operation.

For more information, check out our Tacoma Application Guide or call our Differential Parts Experts for more information. Learn more about Sierra Gear & Axle at Sierragear.com

 

Jeep JK Gear Package Deals

Gear & Axle Package Deals

Are you planning a complete axle build and need Gears, Axles, Kits and a Traction Device? Let us put a package deal together for you! Our packages give you substantial savings over buying parts individually. The following is an example of one of our past package deals…


 

Jeep JK Gear Packages Ring and Pinion, Lockers Axles & More.

Jeep JK Gear Packages - Ring and Pinion

Ring & Pinion Gear Package:

Get the Right Differential Gear Ratio at the Right Price!

Our Jeep JK Gear Packages start as low as $499.00*
Matching ratio Front and Rear Ring and Pinion sets, complete with Mini Install kits (ideal for low-mileage gear ratio changes). This package comes complete with a 2-Year Warranty and is available in 4.56, 4.88 and 5.13 gear ratios for Non-Rubicon Models (5.38 is also available for Rubicon Models)

Gear Package Upgrades

Add Locking Differentials, Limited Slip Differentials or Chromoly Axles to your JK Gear Package and . We have lots of options available. If you don’t see what you’re looking for, give us a call!

Upgrade your Ring and Pinion Gear Package for added savings!

Detroit Locker –

Automatic, Durable & Dependable
Add a Detroit Locker Dana 44 Rear Locking Differential – $575.00*
Add a Detroit Locker Dana 30 Front Locking Differential – $525.00*

ARB Air Locker –

100% Traction on Demand, Proven Strength and Durability
Go from open to fully locked with the flip of a switch.
Add an ARB Air Locker (Front or Rear) for $850.00*

 

AEV Procal Module –

Multi-function recalibrator for Jeep JK owners.
Recalibrate for Tire and Gear Ratio changes, Speedo Correction, Shift Points and More! A must for 2012 and newer ratio changes.
Add an AEV Procal Module for $130.00*

 

Chromoly Axle Shafts –

Up to 40% Stronger than stock Axle Shafts
Add Chromoly Rear Axles – $325.00*

Add Chromoly Front Axles – $425.00*
Complete with a 10-year Warranty!

 

Truetrac Limited-Slip –

Tough, Smooth and Quiet Performance
Add a Truetrac Limited-Slip for Dana 44 Rear Axle – $435.00*
Add a Truetrac Limited-Slip for Dana 30 Front Axle – $375.00*

* Prices subject to change without notice. Prices for upgrade items apply when ordered with Gear Packages only.  Substitutions will effect final package price. Contact our sales department for details. Shipping not included.

ARB Differential Bearing Puller Kit

 

 Differential Bearing Puller Kit from ARB Air LockerDifferential Bearing Puller

ARB’s new Differential Bearing Puller Kit is a professional tool that no automotive differential installer should be without.

As original equipment differential bearings have become more expensive and often difficult to source, it has been increasingly important to attempt to remove the original bearing without causing any damage to it. This specialty tool offers a unique way of removing a differential carrier bearing without the need to get access under the seating face of the bearing cone. The ARB Differential Bearing Puller Features:- Quickly and easily removes the carrier bearings from most automotive differentials- Removes without the same level of risk of carrier bearing damage and Air Locker seal surface damage damage associated with most commercially available bearing pullers.

– Able to remove many bearings that standard bearing pullers cannot

– Works with most models of ARB Air Locker and OEM differential centers

– Comes in a durable carry case with a dedicated powder coated parts tray for easy storage and transport

 

Contact one of our
rear end parts experts today for more information.

 

Chromoly Axle Shafts for the Jeep JK Wrangler

Jeep JK Wrangler Performance Chromoly Axle Shafts

West Coast Differentials stocks Sierra Gear Chromoly axle shafts for the Jeep Wrangler JK.

Sierra Gear Chromoly axle shafts have a 10 year warranty, are built for high performance use and are far more durable than stock axle shafts. These axle shafts are available for all Dana 30 and Dana 44, Rubicon and non-Rubicon models, including a 35 spline Dana 44 upgrade axle kit that can be installed with various locking differentials. Front axles use the stronger JK 1350 U joint, unlike some axle kits that use a 1310 U joint. View our Catalog or Contact our sales department for more information

 

Old Man Emu Suspension Dealer

ARB Bumpers & Old Man Emu Suspension

West Coast Differentials is an Authorized Dealer for ARB Bumpers and Old Man Emu Suspension products. ARB’s complete line of front and rear Bumpers and Winch Bars covers a wide range of vehicle applications, and most front bumpers are airbag approved.

Old Man Emu Suspension Systems are available for most popular vehicle models, and feature a range of tuned components that can be tailored for your specific performance needs.

Northern California residents and Sacramento area locals can save big on shipping by picking up these products at our Rancho Cordova Warehouse location, just a few miles east of downtown Sacramento. For more information about ARB Bumpers and Old Man Emu Suspension, contact our sales department at (800)510-0950.

 

Timken Hub Assemblies

 

Timken Hub Assemblies (Unit Hubs) are available from West Coast Differentials for light duty trucks including most applications for Ford, GM, Dodge and Toyota,
including some for independent rear suspensions. The Timken brand represents OEM quality. Failing hub units will start to growl or wobble. Contact one of our
rear end parts experts today to find the hub assembly you need. For available applications, check out the Timken Hub Assembly Application Chart

 

Jeep JK Wrangler Chromoly Performance Axle Shafts

West Coast Differentials stocks a complete line of Sierra Gear Chromoly axle shafts for the Jeep Wrangler JK. Sierra Gear Chromoly axle shafts have a 10 year warranty, are built for high performance use and are far more durable than stock axle shafts. These axle shafts are available for all Dana 30 and Dana 44, Rubicon and non-Rubicon models, including a 35 spline Dana 44 upgrade axle kit that can be installed with various locking differentials. Front axles use the stronger JK 1350 U joint, unlike some axle kits that use a 1310 U joint. View our catalog or Contact our sales department for more information.

S110, S135 and S150 Differential Rebuild Kits

The Dana S110, S135 and S150 differentials are common in newer Ford F450 and F550 trucks. Many light duty differential shops are finding the need and opportunity to work on these differentials. West Coast Differentials stocks Rebuild Kits for each of these differentials, as well as ring & pinion sets and other associated parts.
Contact one of our rear end parts experts today!

Nissan Titan Locking Differentials

West Coast Differentials has three different locking differentials available for the Nissan Titan Dana 44 Rear axle (M226-32 Spline). These options include the Dana Spicer original factory electric locking differential, Eaton’s Detroit Truetrac and the ARB Air Locker. Both the factory electric locker and the ARB Air Locker are open differentials that can be fully locked by the flip of a switch. The Detroit Truetrac is a smooth-operating limited slip. Axle modifications may be required to install a Truetrac in models equipped with the factory electric locker. These models have unequal axle lengths due to an offset cross-pin. For more information, check out our Application Guide for Nissan, or call our sales department for assistance.